Perhaps one of the most interesting A400M innovations was the decision to adopt “handed” propellers whereby the propellers of each pair of engines turn towards each other.
This counter-rotation characteristic is known as Down-Between-Engines (DBE) and the A400M will be the first aircraft ever to use such a configuration. The advantages of DBE have far-reaching effects both aerodynamically and structurally. Firstly, airflow over the wings is symmetrical, improving lift characteristics and the lateral stability of the aircraft. Secondly, DBE allows for an optimum wing design by eliminating most of the effects of torque and prop-wash on each wing, concentrating the airflow over the most efficient portion of the wing located between the engines. DBE also reduces the “critical engine” effect of severe yaw in the event of an outboard engine failure. The result allows a 17% reduction in the area of the vertical tail surface.

Further aerodynamic advantages inherent in DBE have been found to give a 4% increase in lift from the wing at slow speed, which enables, for the same total lift, a simpler, lighter flap system to be employed. As a consequence of the lessening of the aerodynamic forces applied to the flaps, the surface area of the horizontal tail-plane can also be reduced by 8%.